HDPE Sprinkler Pipes,
HDPE Pipes & Cable Ducts
Three product families under one BIS-certified manufacturing programme — sprinkler-grade HDPE for the farm, pressure-rated HDPE for water and industry, and permanently-lubricated cable duct for telecom infrastructure.
Artificial rainfall, on demand.
Saurabh Shaktiman Sprinkler System is a unique irrigation system. It can also be called artificial rainfall. Water is distributed through pipes to cover field areas, with spray heads and nozzles breaking water into droplets for soil irrigation.
- Standard
- IS-14151 (Part-II):1999
- Sizes
- 50 – 110 mm outer diameter
- Length
- 6 m lengths with coupler
- Pressure
- 2.5 & 3.2 kgf/cm²
- Fittings
- 50 – 110 mm · 4 – 10 kgf/cm²
- Portable and lightweight.
- Chemically inert — safe for liquid fertilizers and pesticides.
- Quick installation via coupler joints.
- Corrosion-resistant fittings.
- Flexible for variable topography.
- Wide sprinkler discharge capacity range.
- Pipes are Ultra-Violet stabilized — protection from sun rays.
- Strong, durable, cost-effective.
Wheat, Gram, Pulses, Vegetables, Cotton, Soya Bean, Tea, Coffee, fodder crops
Residential, Industrial, Hotels, Resorts, Public & Government Enterprises, Golf Courses, Race Courses
Pressure-rated. Hygienically safe.
HDPE pressure pipe is made from high-density polyethylene — a crystalline resin known for its flexibility, toughness and chemical resistance.
- Standard
- IS-4984:1995 (PE-63, PE-80, PE-100)
- Sizes
- 20 – 200 mm diameter
- Pressure
- 2.5 – 16 kgf/cm² (35.5 – 227.5 psi)
- Raw material
- Virgin pipe-grade PE80 / PE63 / PE100
- Length
- Straight lengths to 6 m; coils up to 1000 m
- Excellent corrosion and chemical resistance.
- High flow characteristics.
- Lightweight.
- Excellent flexibility combined with strength — easy to handle and transport.
- Good abrasion resistance.
- Smooth inner walls minimize friction.
- Hygienically safe for water supply.
Sprinkler irrigation, lift irrigation, drip irrigation, water needs in tropical and critical climates, large farm spraying.
Sewage and drainage systems, air conditioning and ducting, radioactive waste dumping, saline water discharge, chilled water discharge, edible products discharge (oil, juice, pulp, milk), acid / base / chemical solution discharge.
Permanently lubricated. Built for OFC.
Saurabh Shaktiman permanently lubricated HDPE Telecom Duct consists of two concentric layers — the outer layer being HDPE, co-extruded with an inner layer of special permanent lubricant.
- Colours
- Orange · Blue · Green · Yellow · Red · Purple · Grey · Black
- Coil sizes
- 250 / 500 / 1000 m
- Markings
- Progressive meter markings throughout
- Pressure
- Pressurised coils available (up to 1 kgf/cm²)
- End seals
- Provided on coils
- Accessories
- Joiner · End Plugs · Duct Cutter · Spanner
- Low friction coefficient — safe, fast OFC installation.
- Reduced joints in the network; lower installation and repair costs.
- Accurate installation and measurement.
- Alternative when HSAB equipment is unavailable.
- Enhances speed and ensures safe, easy, quality installation.
- Optional pre-inserted rope for cable pulling.
- Cable blowing available with full accessories.
Telecommunication, computer networks, automatic signalling, broadband networks.
Railways information networks, highways cable service, electric cable installation.
Made to global standards.
Verified by Indian regulators.
Every Saurabh Shaktiman HDPE product is manufactured to BIS-recognised specifications — IS 4984:1995 for pressure pipes and IS 14151 (Part-II):1999 for sprinkler pipes, in PE-63, PE-80 and PE-100 grades.
- IS 4984:1995
- IS 14151 (Part-II):1999
- PE-63
- PE-80
- PE-100
- BIS
- ISI