Signet Group
Infrastructure · DWC Pipes

Double wall strength. Single-pass installation.

Saurabh Shaktiman Double Wall Corrugated HDPE pipes — IS 16098 Part 2 certified, SN4 to SN16, 110 mm to 1000 mm. Underground cable ducting, drainage and sewerage.

The Technology

A corrugated outer wall provides structural ring stiffness — the smooth inner wall delivers full flow capacity.

DWC (Double Wall Corrugated) pipes combine two walls in one extrusion: a profiled corrugated outer layer that resists soil and traffic loads, bonded to a smooth inner liner that maintains clean, unobstructed flow. The result is a pipe that matches or exceeds concrete in load-bearing performance at a fraction of the weight.

Why DWC HDPE

Four reasons contractors specify DWC.

High ring stiffness

Corrugated outer profile delivers SN4, SN8 and SN16 ring stiffness — resisting soil load and traffic without deformation, using far less material than solid-wall pipe.

Lightweight — faster installation

DWC HDPE is a fraction of the weight of concrete or GI pipe — reduced transport cost, faster laying, less equipment needed on site.

Flexible — survives soil movement

HDPE's flexibility allows DWC pipes to absorb ground movement and settlement without cracking — critical in expansive soils and high seismic zones.

100-year design life

HDPE is chemically inert and immune to electrochemical corrosion — DWC pipes remain structurally intact for a century underground without coating or protection.

Applications

One pipe type. Four major use cases.

Underground Cable Ducting

Red / Orange

Power cables, telecom fibre and communication wiring — red/orange DWC as the standard colour code for electrical and telecom ducting in India.

Common sizes: 110 mm, 160 mm, 200 mm common

Stormwater Drainage

Black / Grey

Municipal stormwater collection and conveyance — replaces precast concrete in urban drainage projects with faster installation and lower cost.

Common sizes: 200 mm to 1000 mm

Underground Sewerage

Black

Gravity sewerage collection networks for residential townships, industrial parks and municipal expansion — SN8 or SN16 for deeper buried mains.

Common sizes: 200 mm to 630 mm common

Highway Culverts

Black

Large-diameter DWC pipes as culverts beneath highways and railways — structural load bearing under heavy traffic with flexible joints.

Common sizes: 400 mm to 1000 mm

Technical Specifications

Size and stiffness matrix · IS 16098 Part 2.

All pipes supplied with rubber ring socket joint. Custom lengths and non-standard diameters available for project orders.

Nominal DiaRing StiffnessLengthJointTypical Use
110 mmSN4 / SN86 mRubber ring socketCable ducting, house connections
160 mmSN4 / SN86 mRubber ring socketCable ducting, small drainage
200 mmSN4 / SN8 / SN166 mRubber ring socketStormwater, small sewer
250 mmSN4 / SN8 / SN166 mRubber ring socketStormwater, sewer lateral
315 mmSN4 / SN8 / SN166 mRubber ring socketSewer main, drainage
400 mmSN4 / SN86 mRubber ring socketPrimary drainage, culvert
500 mmSN4 / SN86 mRubber ring socketMunicipal drainage
630 mmSN4 / SN86 mRubber ring socketLarge culvert, trunk drain
800 mmSN45 m / 6 mRubber ring socketTrunk sewer, major culvert
1000 mmSN45 m / 6 mRubber ring socketMain drain, major culvert
IS 16098 Part 2SN4 · SN8 · SN16BIS LicensedISI Marked
Comparison

DWC HDPE vs. Concrete pipes.

ParameterDWC HDPE (Saurabh Shaktiman)Concrete / RCC Pipe
Weight (per metre)8–50 kg80–500 kg
Installation speedFast — no lifting equipment for small diaSlow — crane required throughout
Joint typeRubber ring — push fit, no mortarMortar joint — curing time required
FlexibilityDeflects 5–10% without structural damageRigid — cracks under differential settlement
CorrosionImmune — HDPE is chemically inertSulphate and acid attack in sewers
Design life100 years30–50 years in aggressive soils
Transport costLow — lightweight, nesting possibleHigh — heavy, one layer per truck

Need DWC pipes for a project?

Share the diameter, ring stiffness class, total meterage and project timeline — we'll quote within 24 hours.